Waterproof Servo SER-110X
€380,00 exc Tax
Programmable, digital, waterproof servo, submersible up to 100 meters.
Blue Trail Engineering’s SER-110X is in a class by itself: a depth-rated, underwater servo at a fraction of the size and cost of other subsea actuators. Ideal for Autonomous Surface Vehicles as well as Remotely Operated Vehicles, the SER-110X provides reliable, long-term actuation at depths up to 100 meters.
- Submersible up to 100 meters
- Programmable digital servo
- Compact size
- Low power draw
- Engineered for months of exposure in seawater or fresh water
- Corrosion-resistant titanium output shaft, Delrin® enclosure
- Standard R/C PWM interface
- Servo horns included
The SER-110X is based on the Hitec D954SW 32-bit digital servo. Blue Trail integrates a modified D954SW into a corrosion-resistant, depth-rated Delrin® housing with a ball-bearing-supported titanium output shaft and nitrile quad-ring shaft seal.
The SER-110X utilizes the compact and reliable Cobalt 3-pin dry-mate bulkhead connector, compatible with Cobalt Series cables from Blue Trail Engineering. Custom connection options are also available.
| Environmental | |
| Depth Rating | 100 meters |
| Operating Temperature | -10° C to +50° C |
| Performance | |
| Torque | 18.0 kg-cm / 250 oz-in @ 4.8 V 29.0 kg-cm / 403 oz-in @ 7.4 V |
| Speed | 0.19s/60deg. @ 4.8 V |
| Travel Angle | ± 74 deg. maximum |
| Electrical | |
| Operating Voltage | 4.8 V – 7.4 V |
| Idle Current | 0.03 A |
| No-load Current | 0.5 A |
| Stall Current | 5.2 A |
| Motor Type | coreless brushed |
| Feedback Type | 1 million-cycle potentiometer |
| Materials | |
| Gears | steel |
| Output Shaft | titanium |
| Case | Delrin® |
| Size/Weight | |
| Dimensions | 56 mm X 82 mm X 29 mm |
| Weight in air | 180 grams |
| Weight in water | 65 grams |
| Interface | |
| Connector | |
| PWM Range | 850µs – 2350µs |
| PWM Voltage Range | 3 – 5 V |
