BlueROV Battery Cable with Cobalt Connectors
€145,00 – €155,00 exc Tax
Upgrade your BlueROV with this Cobalt cable set to make your battery field-replaceable! Uses 4-pin Cobalt connectors with paired wires to give a 40-amp continuous current rating.
Includes:
- Cobalt 4-pin bulkhead connector, 100 mm wire length, pre-installed 3.5-mm female bullet connectors
- Cobalt 4-pin cable with M10 Simple Penetrator, 190 mm standard OR custom cable length, wires extend 100 mm from Simple Penetrator, pre-installed 3.5-mm male bullet connectors
Install the bulkhead connector on the Electronics Enclosure and the cable on the Battery Enclosure
Upgrade your BlueROV with this Cobalt cable set to make your battery field-replaceable! Uses 4-pin Cobalt connectors with paired wires to give a 40-amp continuous current rating.
Includes:
- Cobalt 4-pin bulkhead connector, 100 mm wire length, pre-installed 3.5-mm female bullet connectors
- Cobalt 4-pin cable with M10 Simple Penetrator, 190 mm standard OR custom cable length, wires extend 100 mm from Simple Penetrator, pre-installed 3.5-mm male bullet connectors
Install the bulkhead connector on the Electronics Enclosure and the cable on the Battery Enclosure.
Environmental |
|
Depth Rating | 600 meters |
Operating Temperature | 0° C to +50° C |
Electrical |
|
Maximum voltage | 100 VRMS / 150 VDC |
Rated current | 40 amps |
Wire size | 16 AWG (paired) |
Wire stranding | 4-conductor version: 19/29 |
Materials |
|
Penetrator | 316 stainless steel |
Cable connector shell | 316 stainless steel |
Cable connector insert | PEEK |
Cable sockets | gold-plated contact |
Cable jacket | 95A UV-stabilized polyurethane |
wire insulation | ETFE |
O ring | nitrile |
Locking sleeve | acetal |
Dimensions |
|
Penetrator thread | M10 X 1.5 |
Penetrator hex | 16 mm |
Locking sleeve threads | M16 X 1.5 |
Cable outer diameter | 8.0 mm |
