-
6″ Left Angle Micro-USB to USB-A Cable
-
6″ Straight Micro-USB to USB-A Cable
-
Acetone Cable Preparation Wipes (10 pcs)
-
Advanced ROV Electronics Package for ArduSub
-
Aluminum End Cap (2″ Series)
-
Aluminum End Cap (3″ Series)
-
Aluminum End Cap (4″ Series)
-
Aluminum End Cap (6″ Series)
-
Aluminum End Cap (8″ Series)
-
Aluminum End Cap with 10 Holes (4″Series)
-
Aluminum End Cap with 14 Holes (4″ Series)
-
Aluminum End Cap with 15 Holes (6″ Series)
-
Aluminum End Cap with 15 Holes (8″ Series)
-
Aluminum End Cap with 18 Holes (4″ Series)
-
Aluminum End Cap with 2 Holes (2″ Series)
-
Aluminum End Cap with 25 Holes (8″ Series)
-
Aluminum End Cap with 4 Holes (3″ Series)
-
Aluminum End Cap with 5 Holes (4″ Series)
-
Aluminum End Cap with 5 Holes (6″ Series)
-
Aluminum End Cap with 5 Holes (8″ Series)
-
Aluminum End Cap with 7 Holes (3″ Series)
-
Aluminum Tube – 11.75″, 298mm (4″ Series) (R3 Version)
-
Aluminum Tube – 8.75″, 222mm (3″ Series) (R3 Version)
-
ArduSub Raspbian MicroSD Card (16GB)
-
Bar02 Ultra High Resolution 10m Depth/Pressure Sensor
-
Bar100 High-Resolution 1000m Depth/Pressure Sensor
-
Bar30 High-Resolution 300m Depth/Pressure Sensor
-
Basic ESC
-
Battery Cell Checker
-
Battery Power Cable
-
Binder 770 Bulkhead Connector
-
Binder 770 Plug
-
BLUART USB to TTL Serial and RS485 Adapter
-
Blue ROV2
-
BlueROV2 Enclosure Only
-
BlueROV2 Fairing
-
BlueROV2 Frame Only
-
BlueROV2 Heavy Configuration Retrofit Kit
-
BlueROV2 Heavy Fairing Add-on
-
BlueROV2 Heavy Machined Buoyancy Foam
-
BlueROV2 Heavy Thruster Guards
-
BlueROV2 Machined Buoyancy Foam
-
BlueROV2 Spares Kit
-
Cable Repair Kit
-
Camera Tilt System
-
Cast Acrylic Tube – 11.75″, 298mm (4″ Series)
-
Cast Acrylic Tube – 11.75″, 298mm (6″ Series)
-
Cast Acrylic Tube – 11.75″, 298mm (8″ Series)
-
Cast Acrylic Tube – 8.75″, 222mm (3″ Series)
-
Cast Acrylic Tube -11.75″, 298mm (3″ Series)
-
Celsius Fast-Response, ±0.1?C Temperature Sensor (I2C)
-
Clear Acrylic End Cap (3″Series)
-
Clear Acrylic End Cap (4″ Series)
-
Clear Acrylic End Cap (6″ Series)
-
Clear Acrylic End Cap (8″ Series)
-
Clear Acrylic End Cap with 10 Holes (4″Series)
-
Coax-Seal Moldable Sealant
-
Cradle Extension
-
Customizable Cast Acrylic Tube (3″ Series)
-
Customizable Cast Acrylic Tube (4″ Series)
-
Dome End Cap (3″ Series)
-
Dome End Cap (4″ Series)
-
Electronics Tray (4″ Series)
-
Enclosure Clamp (3″ Series)
-
Enclosure Clamp (4″ Series)
-
Enclosure Cradles (4″ Series)
-
Enclosure Vent and Plug
-
Fathom ROV Tether (by the meter)
-
Fathom ROV Tether (ROV-ready)
-
Fathom Slim ROV Tether (by the meter)
-
Fathom Slim ROV Tether (ROV-ready)
-
Fathom Spool
-
Fathom-X Tether Interface (FXTI)
-
Fathom-X Tether Interface Board Set
-
GoPro Mount for BlueROV2
-
Hand Operated Vacuum Pump
-
Hex Key Set
-
High Power Cable (2 conductors, 12 AWG)
-
High-Power Tether Cable with Connectors for OTPS
-
I2C Bus Splitter
-
I2C Level Converter
-
Lithium Battery Charger
-
Lithium-ion Battery (14.8V, 18Ah)
-
Long Hex Standoff
-
Low-Light Analog Camera
-
Low-Light HD USB Camera
-
Lumen Cable (3 conductors, 22 AWG)
-
Lumen Subsea Light (Pre-Connected Sets)
-
Lumen Subsea Light for ROV/AUV
-
M10 Cable Penetrator Blank (No Hole)
-
M10 Cable Penetrator for 4-5mm Cable
-
M10 Cable Penetrator for 6mm Cable
-
M10 Cable Penetrator for 8mm Cable
-
M10 Cable Penetrator for Fathom Slim Tether
-
M6 Cable Penetrator Blank (No Hole)
-
M6 Cable Penetrator for 4-5mm Cable
-
Mixing Tips (10 pcs)
-
Moisture Indicating Silica Gel Desiccant Bags
-
Mount for USB Camera
-
Mounting Bracket
-
Newton Subsea Gripper
-
O-Ring Flange (3″ Series)
-
O-Ring Flange (4″ Series)
-
O-Ring Flange (6″ Series)
-
O-Ring Flange (8″ Series)
-
O-Ring Flanges (2″ Locking Series)
-
O-Ring Pick
-
O-Ring Set for M10 Cable Penetrators
-
Outland Technology Power Supply for the BlueROV2
-
Payload Skid
-
PCB for Bar02 Ultra High Resolution 10m Depth/Pressure Sensor
-
PCB for Bar30 High-Resolution 300m Depth/Pressure Sensor
-
PCB for Celsius Fast-Response, ±0.1°C Temperature Sensor
-
Penetrator Wrench
-
Ping Sonar Altimeter and Echosounder
-
Ping360 Scanning Imaging Sonar
-
Potting Cartridge Dispenser
-
Potting Kit (x 10)
-
Power Sense Module
-
ROV Power Supply Enclosure for OTPS
-
Short Hex Standoff
-
Silicone Grease – 10g Tube
-
Silicone Self-bonding Tape
-
Single Fathom-X Tether Interface Board
-
SOS Leak Sensor
-
SOS Probe Tips
-
SOS Probes
-
Spare Locking Cord and Handles
-
Spare O-Ring Set (2″ Locking Series)
-
Spare O-Ring Set (2″ Series)
-
Spare O-Ring Set (3″ Series)
-
Spare O-Ring Set (4″ Series)
-
Spare O-Ring Set (6″ Series)
-
Spare O-Ring Set (8″ Series)
-
Stainless Steel Ballast Weight (200 g, 7 oz)
-
Subsea Buoyancy Foam: R-3312
-
Subsea Buoyancy Foam: R-3318
-
Subsea LED Indicator
-
Switch
-
T100 Propeller Set
-
T100/T200 Nozzle
-
T200 BlueROV2 Spare (with penetrator and short cable)
-
T200 Propeller Set
-
T200 Thruster
-
T200 Thruster Core
-
T200/M200 Rotor
-
Tether Cable Thimble
-
Thruster Cable (3 conductors, 18 AWG)
-
Thruster Commander
-
Topside Power Supply Unit for OTPS
-
Underwater Robotics: Science, Design & Fabrication
-
Vacuum Plug
-
Vent Plug
-
Water Linked Locator-A1
-
Water Linked Locator-D1
-
Water Linked Locator-S1
-
Water Linked Locator-U1
-
Water Linked M64 Acoustic Modem
-
Water Linked Receivers
-
Watertight Enclosure (2″ Locking Series)
-
Watertight Enclosure End Caps and Flange Caps (2″ Locking Series)
-
Watertight Enclosure for ROV/AUV (3″ Series)
-
Watertight Enclosure for ROV/AUV (4″ Series)
-
Watertight Enclosure for ROV/AUV (6″ Series)
-
Watertight Enclosure for ROV/AUV (8″ Series)
-
Watertight Enclosure Tube (2″ Locking Series)
+30 2612 615102 info@imachines.gr
